> Services > APC > APC PDU Service

APC PDU Service

The APC PDU service monitors the phase status of the user-specified phase (circuit) and reports the low/medium/high thresholds for that sensor, as dictated by the PDU.

Service Type

SNMP

Instances on a Device

3

Supported Systems/Applications

Any APC PDU device that supports the PowerNet392 SNMP MIB

Device Class

Other

Monitored By

Windows probe
Scan Interval 5 minutes
Phase Number Enter the phase number (either 1, 2, or 3) to be monitored. The default value is 1, and the only values that are accepted are 1, 2, or 3.

OID/Calculation

MSP N-central services use Reverse Polish Notation (RPN) for all calculation formulae.

Metric Name

OID/Calculation

Load (Amperes) 1.3.6.1.4.318.1.1.12.2.3.1.1.2/ 10
Maximum Acceptable Load (Amperes) 1.3.6.1.4.318.1.1.12.2.2.1.1.4
Phase Utilization ((Load/10)/Maximum Acceptable Load)*100