> Services > Server Temperature > Server Temp (IBM) Service

Server Temp (IBM) Service

The Server Temp (IBM) service monitors the status of the specified temperature sensor on an IBM server.

Special Note

This service operates in conjunction with the vendor-supplied hardware agent and requires SNMP to be configured so that it is accessible from both the MSP N-central Agent and the MSP N-central Probe.

The following are the requirements in order to associate this service with a device:

  • The device must undergo discovery using a Probe-based asset scan.
  • You need to enable SNMP enabled on the device on the Properties tab of the device.
  • Once you enable SNMP for the device, you need to configure a community string. The default community string is public.

Service Type

SNMP

Instances on a Device

10

Supported Systems/Applications

Any UMSMSENSOR-MIB Compliant Device

Device Class

Server - Generic, Server - Windows

Monitored By

Windows Probes

Scan Interval

5 minutes

Temperature Sensor Name

The name of the monitored temperature sensor. To see the list of available temperature probes, query the device with the 1.3.6.1.4.1.2.6.159.1.1.80.1.1.1 SNMP OID.

OID/Calculation

Metric Name

OID/Calculation

Description

Temperature 1.3.6.1.4.1.2.6.159.1.1.80.1.1.2  
Temperature Sensor Status 1.3.6.1.4.1.2.6.159.1.1.80.1.1.21

Describes the current status of the temperature sensor as one of:

  • OK
  • Degraded
  • Pred Fail (predicted failure)