> Services > RAID Status > RAID Status (HP) Service

RAID Status (HP) Service

The RAID Status (HP) service monitors the overall status of a RAID array on an HP/ProLiant server.

Special Note

This service operates in conjunction with the vendor-supplied hardware agent and requires SNMP to be configured so that it is accessible from both the MSP N-central Agent and the MSP N-central Probe.

The following are the requirements in order to associate this service with a device:

  • The device must undergo discovery using a Probe-based asset scan.
  • You need to enable SNMP enabled on the device on the Properties tab of the device.
  • Once you enable SNMP for the device, you need to configure a community string. The default community string is public.

Service Type


Instances on a Device


Supported Systems/Applications

HP Proliant Servers running HP Insight Manager 5.1 and later agents

Device Class

Server - Generic and Server - Windows

Monitored By

Windows Probes

Scan Interval

15 minutes


Metric Name



RAID Status (HP)

The overall condition status of the disk array is mapped as:

  • Normal = 1, 2
  • Warning = 3
  • Failed = 4


  • 1 = Other
  • 2 = OK
  • 3 = Failed
  • 4 = Predictive Failure